International Proceedings
No | Year | Title | Source | Author |
1 | 2020 | Effects of water to solid ratio on thermal conductivity of fly ash-based geopolymer paste | IOP Conference Series: Earth and Environmental Science | Agustini, N.K.A., Triwiyono, A., Sulistyo, D., Suyitno |
2 | 2020 | Effect of punch velocity on punch force and burnish height of punched holes in punching procces of pure titanium sheet | Journal of Physics: Conference Series | Kurniawan, Y., Mahardika, M., Suyitno |
3 | 2020 | Comparative study of bonang gamelan musical instrument between hot forging and Post Cast Heat Treatment/PCHT on microstructure and mechanical properties | Journal of Physics: Conference Series | Slamet, S., Kusumaningtyas, I., Suyitno |
4 | 2020 | The effect of edm process on the microstructure of cp-titanium grade 2 and aisi 316 l in cardiovascular stent manufacturing | Key Engineering Materials | Pujiyulianto, E., Amalia, Y., Wahyuningsih, T., Field, F.Y.P.G., Mirahati, R.Z., Suyitno |
5 | 2020 | Numerical convergence in wear volume prediction of uhmwpe acetabular cup paired with cp ti femoral head hip implants | Key Engineering Materials | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
6 | 2020 | The influence of SMAT and polishing on the degradation of AZ31B magnesium alloy in 3.5 wt.% NaCl solution | Key Engineering Materials | Arifvianto, B., Mahardika, M., Salim, U.A., Suyitno, S. |
7 | 2020 | Hydroxyapatite (HA) for wastewater treatment | AIP Conference Proceedings | Hariyanto, S.D., Sriani, T., Mahardika, M., Prihandana, G.S. |
8 | 2020 | Effect of non-solvent concentration in the coagulation bath on water permeability of PES membrane | AIP Conference Proceedings | Yonita, S., Sriani, T., Mahardika, M., Prihandana, G.S. |
9 | 2020 | A study analysis of micro-hydro powerplant (MHPP) Potential from cooling of steam turbine | Proceeding – 2nd International Conference on Technology and Policy in Electric Power and Energy, ICT-PEP 2020 | Triasdian, Y., Pamingotan, H., Triatmodjo, B., Sriwijaya, R., Mahardika, M., Muflikhun, M.A. |
10 | 2020 | Design of PLC-based Control System for 18650 Lithium-ion Battery Dismantling Machine | IOP Conference Series: Materials Science and Engineering | Hadiwibowo, S., Wisambodhi, S.M., Mahardika, M., Perdana, I. |
11 | 2019 | Design and Simulation of Auto-Shifting System in Manual Transmission Gearbox for Electric Race Car with Fuzzy Logic Controller on Matlab-Simulink | Journal of Physics: Conference Series | Ramadhan, R.M., Sudiarso, A., Mahardika, M. |
12 | 2019 | Forging process on gamelan bar tin bronze Cu-25wt.%Sn post casting deformation to changes in microstructure, density, hardness, and acoustic properties | IOP Conference Series: Materials Science and Engineering | Slamet, S., Kusumaningtyas, I., Suyitno |
13 | 2019 | Wear Prediction of UHMWPE Cup Against Commercially Pure Titanium Hip Implant with the Nonlinear Load and Contact Area Wear Equation | IOP Conference Series: Materials Science and Engineering | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
14 | 2019 | The Influence of Mold Material on Cooling Curve, Solidification Parameters, and Micro-hardness of Al-6wt.%Si in Unidirectional Solidification | IOP Conference Series: Materials Science and Engineering | Masnur, D., Suyitno, Malau, V. |
15 | 2019 | Characterization of the Wear Resistance of 3D Printed Polylactic-Acid (PLA) in Water and Bovine Serum | IOP Conference Series: Materials Science and Engineering | Arifvianto, B., Putra, A.T., Prayoga, B.T., Mahardika, M., Suyitno |
16 | 2019 | Effect of Composition and Pouring Temperature of Cu-Sn Alloys on the Fluidity and Microstructure by Investment Casting | IOP Conference Series: Materials Science and Engineering | Slamet, S., Suyitno, Kusumaningtyas, I. |
17 | 2019 | Characteristics of stainless steel 316L artificial lumbar disk model made by investment casting | Proceedings – 2019 5th International Conference on Science and Technology, ICST 2019 | Setyana, L.D., Mahardika, M., Suyitno |
18 | 2019 | Effects of femoral head diameter on the predicted acetabular cup wear volume of CP-Ti and UHMWPE hip implants | Journal of Physics: Conference Series | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
19 | 2019 | Degradation of mechanically surface treated az31b magnesium alloy in 3.5 wt.% nacl solution | Materials Science Forum | Budi, A., Suyitno, Muslim, M. |
20 | 2018 | Experiment and FEM simulation of static test of knee joint prostheses | AIP Conference Proceedings | Suyitno, Purba, E., Pudjilaksono, L. |
21 | 2018 | Vibration of an I-beam bicycle frame made by aluminum casting | AIP Conference Proceedings | Kusumaningtyas, I., Agandhi, R.H., Isnawan, A.A., Suyitno |
22 | 2018 | Bifurcation stenting design and analysis using finite element method | AIP Conference Proceedings | Suyitno, Pratama, H.I., Pudjilaksono, L. |
23 | 2018 | Wear Prediction of UHMWPE Acetabular Cup against CP Titanium Femoral Head in a Hip Joint Simulator | IOP Conference Series: Materials Science and Engineering | Handoko, H., Suyitno, S., Dharmastiti, R., Magetsari, R. |
24 | 2018 | Pin on flat wear volume prediction of UHMWPE against cp Ti for orthopedic applications | AIP Conference Proceedings | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
25 | 2018 | Design and finite element analysis of micro punch CNC machine modeling for medical devices | AIP Conference Proceedings | Pranoto, S.H., Mahardika, M. |
26 | 2018 | Finite element analysis to determine the stress distribution, displacement and safety factor on a microplate for the fractured jaw case | AIP Conference Proceedings | Pratama, J., Mahardika, M. |
27 | 2017 | Effect of clearance and punch speed on the cutting surface quality results of a brass blanking on the micropunch CNC machine | AIP Conference Proceedings | Ristiawan, I., Mahardika, M. |
28 | 2017 | Simulation and experiment based optimization of calligraphy manufacturing using a 5-axis CNC Milling Machine | Proceedings – 2016 2nd International Conference on Science and Technology-Computer, ICST 2016 | Muflikhun, M.A., Mahardika, M., Subarmono, Rochardjo, H.S.B. |
29 | 2017 | UAV long range surveillance system based on BiQuad antenna for the Ground Control Station | Proceedings – 14th IEEE Student Conference on Research and Development: Advancing Technology for Humanity, SCOReD 2016 | Mahardika, M., Nugroho, G., Prasetyo, E.Y. |
30 | 2017 | Fatigue crack propagation of ultra-high molecular weight polyethylene | Proceedings – 2017 7th International Annual Engineering Seminar, InAES 2017 | Suyitno, Pujilaksono, L. |
31 | 2017 | Static test and simulation of hip joint prosthesis | Proceedings – 2017 7th International Annual Engineering Seminar, InAES 2017 | Suyitno, Sutomo, L. |
32 | 2017 | Design and modeling balloon-expandable coronary stent for manufacturability | IOP Conference Series: Materials Science and Engineering | Suryawan, D., Suyitno |
33 | 2017 | Development of the Gliding Hole of the Dynamics Compression Plate | IOP Conference Series: Materials Science and Engineering | Salim, U.A., Suyitno, Magetsari, R., Mahardika, M. |
34 | 2017 | Neutron radiography and tomography investigations on the porosity of the as-cast titanium femoral stem | IOP Conference Series: Materials Science and Engineering | Sutiyoko, Suyitno, Mahardika, M., Akbar, F., Juliani, Setiawan, Baroto |
35 | 2017 | Neutron computed tomography investigation of the porosity on the titanium femoral knee investment casting | IOP Conference Series: Materials Science and Engineering | Prayoga, B.T., Suyitno, Dharmastiti, R., Akbar, F., Juliani |
36 | 2017 | Effect of T6 heat treatment and artificial aging on mechanics and fatigue properties of A356.0 aluminum alloy produced by 350 rpm centrifugal casting | Proceedings – 2016 6th International Annual Engineering Seminar, InAES 2016 | Iswanto, P.T., Akhyar, H., Malau, V., Suyitno, Wirawan, R. |
37 | 2017 | Increasing yield strength of AISI 316L plastically deformed by expanded hole techniques | Materials Science Forum | Salim, U.A., Suyitno, Magetsari, R., Mahardika, M. |
38 | 2017 | Design of mini interchanged rolling mill | Proceedings – 2017 7th International Annual Engineering Seminar, InAES 2017 | Salim, U.A., Purwanto, C. |
39 | 2016 | Effect of gating system on porosity and surface roughness of femoral stem in centrifugal casting | AIP Conference Proceedings | Sutiyoko, Suyitno, Mahardika, M. |
40 | 2016 | Influence of Clearance and Punch Velocity on the Quality of Pure Thin Copper Sheets Blanked Parts | IOP Conference Series: Materials Science and Engineering | Zakariya Lubis, D., Mahardika, M. |
41 | 2016 | Study on characteristics of electrochemical machining in producing multilayered microfilters | AIP Conference Proceedings | Sudiarso, A., Aladiat, A.A., Mahardika, M. |
42 | 2015 | Review of surface modification of nanoporous polyethersulfone membrane as a dialysis membrane | International Journal of Technology | Prihandana, G.S., Sriani, T., Mahardika, M. |
43 | 2014 | Surface characteristics of indonesian cortical bone screw | Advanced Materials Research | Laksono, P.W., Mahardika, M., Suyitno, Dewo, P. |
44 | 2014 | The influence of sandblasting and electropolishing on the surface hardness of AISI 316L stainless steel | Advanced Materials Research | Suyitno, Ishak |
45 | 2014 | Application of powder suspended in dielectric fluid for fine finish micro-EDM of Inconel 718 | International Journal of Advanced Manufacturing Technology | Prihandana, G.S., Sriani, T., Mahardika, M., Hamdi, M., Miki, N., Wong, Y.S., Mitsui, K. |
46 | 2013 | Study of workpiece vibration in powder-suspended dielectric fluid in micro-EDM processes | International Journal of Precision Engineering and Manufacturing | Prihandana, G.S., Mahardika, M., Hamdi, M., Wong, Y.S., Miki, N., Mitsui, K. |
47 | 2013 | Characterization of space holder removal through water leaching for the preparation of biomedical titanium scaffolds | International Powder Metallurgy Congress and Exhibition, Euro PM 2013 | Arifvianto, B., Leeflang, M.A., Duszczyk, J., Zhou, J. |
48 | 2012 | Design and analysis of dynamics compression plate by finite element analysis | Procedia Engineering | Mahardika, M., Arifvianto, B., Suyitno, Wibowo, A., Prihandana, G.S. |
49 | 2012 | Effect of slag ball blasting treatment on surface structure,roughness and wettability of 316LVM stainless steel | Procedia Engineering | Arifvianto, B., Pohan, G.A., Suyitno, Mahardika, M. |
50 | 2012 | Fluidity dan roughness during lost-foam casting of AA356.1 | Procedia Engineering | Suyitno, Karim, I.J.A. |
51 | 2012 | Effect of pouring temperature and casting thickness on fluidity, porosity and surface roughness in lost foam casting of gray cast iron | Procedia Engineering | Suyitno, Sutiyoko |
52 | 2011 | Roughness reduction in AISI 316L stainless steel after surface mechanical attrition treatment (SMAT) | AIP Conference Proceedings | Arifvianto, B., Suyitno, Mahardika, M. |
53 | 2011 | Contouring posterior and lateral tibia of Javanese people based on X-Rays images | Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011, ICICI-BME 2011 | Suyitno, Arifvianto, B., Sriwijaya, R.R.A., Nugroho, Y.H., Mahardika, M., Dewo, P. |
54 | 2011 | Hybrid surface treatment for improving mechanical and surface properties of AISI 316L stainless steel | Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011, ICICI-BME 2011 | Arifvianto, B., Suyitno, Mahardika, M. |
55 | 2011 | Study on the effect of nano and micro MoS2 powder in micro-electrical discharge machining | Advanced Materials Research | Prihandana, G.S., Sriani, T., Prihandana, K., Prihandana, Y., Mahardika, M., Hamdi, M., Mitsui, K. |
56 | 2009 | Surface roughness and wettability of AISI 316L induced by surface mechanical attrition treatment with different milling ball diameter | International Conference on Instrumentation, Communication, Information Technology, and Biomedical Engineering 2009, ICICI-BME 2009 | Arifvianto, B., Suyitno |
57 | 2009 | Simple model of Micro-Electrical Discharge Machining | Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 | Sar, S., Prihandana, G.S., Mahardika, M., Hamdi, M., Mitsui, K. |
58 | 2009 | Workpiece vibration aided nano-graphite powder suspended dielectric fluid in micro-electrical discharge machining (μ-EDM) processes | Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 | Prihandana, G.S., Mahardika, M., Sar, S., Hamdi, M., Wong, Y.S., Mitsui, K. |
59 | 2008 | Acoustic emission signals in the micro-EDM of PCD | Advanced Materials Research | Mahardika, M., Mitsui, K., Taha, Z. |
60 | 2005 | Structure features related to hot tearing during direct chill casting | Proceedings of the Australasian Conference and Exhibition – Aluminium Cast House Technology | Eskin, D., Suyitno, Katgerman, L. |
61 | 2004 | Effect of casting speed on structure formation and hot tearing during direct-chill casting of AL-CU alloys | Solidification Processes and Microstructures: A Symposium in Honor of Wilfried Kurz | Suyitno, Eskin, D., Katgerman, L. |
62 | 2004 | Modeling of single-roll strip casting of AL-1%MN alloy: Correlation of strip thickness, solidification zone length and puddle shape | Multiphase Phenomena and CFD Modeling and Simulationin Materials Processes | Suyitno, Straatsma, E.N., Katgerman, L. |
63 | 2003 | Evaluation of mechanical and non-mechanical hot tearing criteria for DC casting of an aluminum alloy | TMS Light Metals | Suyitno, Kool, W.H., Katgerman, L. |
64 | 2003 | Experimental description and process simulation of direct chill (DC) casting of aluminum alloys | Proceedings of the Australian Asian Pacific Conference on Aluminium Cast House Technology | Katgerman, L., Eskin, D.G., Venneker, B.C.H., Zuidema Jr., J., Suyitno |
65 | 2002 | Determination of boundary conditions during the start-up of DC casting | American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD | Suyitno, Katgerman, L., Burghardt, A. |
66 | 2002 | Determination of boundary conditions during the start-up of DC casting | ASME International Mechanical Engineering Congress and Exposition, Proceedings | Suyitno, Katgerman, L., Burghardt, A. |
67 | 2002 | Micro-mechanical model of hot tearing at triple junctions in DC casting | Materials Science Forum | Suyitno, Kool, W.H., Katgerman, L. |
68 | 2001 | On the plastic flow behaviour of aluminum alloys in the mushy zone | Advances in the Metallurgy of Aluminum Alloys | Zheng, M., Suyitno, Van Haaften, W.M., Katgerman, L. |