International Journal
No | Year | Title | Source | Author |
1 | 2021 | Mechanical properties and thermal conductivity of fly ash-based geopolymer foams with polypropylene fibers | Applied Sciences (Switzerland) | Agustini, N.K.A., Triwiyono, A., Sulistyo, D., Suyitno, S. |
2 | 2021 | Effect of pulse current in manufacturing of cardiovascular stent using EDM die-sinking | International Journal of Advanced Manufacturing Technology | Pujiyulianto, E., Suyitno |
3 | 2021 | Effects of extruder temperatures and raster orientations on mechanical properties of the FFF-processed polylactic-acid (PLA) material | Rapid Prototyping Journal | Arifvianto, B., Wirawan, Y.B., Salim, U.A., Suyitno, S., Mahardika, M. |
4 | 2021 | Composition Profile and Microstructure Formation of Unidirectionally Solidified Al–4.5 wt% Cu | International Journal of Metalcasting | Masnur, D., Malau, V., Suyitno, S. |
5 | 2021 | Effect of high-tin bronze composition on physical, mechanical, and acoustic properties of gamelan materials | Archives of Foundry Engineering | Slamet, S., Suyitno, S., Kusumaningtyas, I., Miasa, I.M. |
6 | 2021 | Precision electropolishing on fabricating ss 316l microchannel – a taguchi approach | International Journal on Engineering Applications | Setyawan, M.A., Mahardika, M., Sriani, T., Miki, N., Prihandana, G.S. |
7 | 2021 | Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy | International Journal of Engineering, Transactions B: Applications | Kusmono, Bora, C., Salim, U.A. |
8 | 2020 | Effects of cold rolling (Cr) and annealing time on microstructure and mechanical properties of aa 5052 aluminum alloy | Metalurgija | Kusmono, Bora, C., Salim, U.A. |
9 | 2020 | Micromachining in powder-mixed micro electrical discharge machining | Applied Sciences (Switzerland) | Prihandana, G.S., Mahardika, M., Sriani, T. |
10 | 2020 | The effect of punch geometry on punching process in titanium sheet | Jurnal Teknologi | Kurniawan, Y., Mahardika, M., Suyitno |
11 | 2020 | Oblique gate direction during centrifugal casting in artificial lumbar disc model of CP-Ti | Acta Metallurgica Slovaca | Setyana, L.D., Mahardika, M., Suyitno |
12 | 2020 | Comparison of surface characteristics of medical-grade 316L stainless steel processed by sand-blasting, slag ball-blasting and shot-blasting treatments | Journal of Engineering and Technological Sciences | Arifvianto, B., Mahardika, M., Salim, U.A., Suyitno |
13 | 2019 | Effect of composition and pouring temperature of Cu(20-24)wt.%Sn by sand casting on fluidity and mechanical properties | Journal of Mechanical Engineering and Sciences | Slamet, S., Suyitno, Kusumaningtyas, I. |
14 | 2019 | Sliding wear characteristics of FDM-processed polylactic-acid in bovine blood serum | Journal of Mechanical Engineering and Sciences | Arifvianto, B., Putra, A.T., Prayoga, B.T., Dharmastiti, R., Salim, U.A., Mahardika, M., Suyitno |
15 | 2019 | Effect of preheating on punch force, sheared surface and work hardening in cold punching process of commercially pure titanium sheet | International Review of Mechanical Engineering | Kurniawan, Y., Mahardika, M., Suyitno, Ammllah, M.H. |
16 | 2019 | Influence of gate shape and direction during centrifugal casting on artificial lumbar disc model of Cp-Ti | Acta Metallurgica Slovaca | Setyana, L.D., Mahardika, M., Sutiyoko, Suyitno |
17 | 2018 | Surface morphology, roughness and wettability of the medical grade 316L stainless steel processed with surface mechanical attrition treatment and electropolishing for the preparation of osteosynthesis plate | Journal of Physical Science | Arifvianto, B., Suyitno, Mahardika, M. |
18 | 2018 | Finite element analysis of osteosynthesis miniplate for the reconstruction of parasymphyseal compound fracture | International Journal on Advanced Science, Engineering and Information Technology | Mahardika, M., Wicaksono, R.A., Widiastuti, M.G., Arifvianto, B., Suyitno |
19 | 2018 | Influence of isothermal oxidation on corrosion resistance of titanium in bovine serum | Acta Metallurgica Slovaca | Prayoga, B.T., Suyitno, Dharmastiti, R. |
20 | 2018 | Microstructural characterization, defect and hardness of titanium femoral knee joint produced using vertical centrifugal investment casting | Journal of Mechanical Science and Technology | Prayoga, B.T., Dharmastiti, R., Akbar, F., Suyitno |
21 | 2017 | Hot tearing susceptibility of aluminum alloys using CRCM-Horizontal mold | Results in Physics | Akhyar, H., Malau, V., Suyitno, Iswanto, P.T. |
22 | 2017 | Diametral compression behavior of biomedical titanium scaffolds with open, interconnected pores prepared with the space holder method | Journal of the Mechanical Behavior of Biomedical Materials | Arifvianto, B., Leeflang, M.A., Zhou, J. |
23 | 2016 | Prediction of Shrinkage Porosity in Femoral Stem of Titanium Investment Casting | Archives of Foundry Engineering | Sutiyoko, Suyitno, Mahardika, M., Syamsudin, A. |
24 | 2016 | Three dimensional morphometry of proximal femur to design best-fit femoral stem for Indonesian population [Morfometría tridimensional del fémur proximal para diseñar prótesis a medida en la población de Indonesa] | International Journal of Morphology | Dewo, P., Suyitno, Dharmastiti, R., Salim, U.A., Hidayat, L., Wibowo, P.A., Lanodiyu, Z.A., Magetsari, R. |
25 | 2016 | The wear behavior of UHMWPE against surface modified CP-titanium by thermal oxidation | Tribology in Industry | Prayoga, B.T., Suyitno, S., Dharmastiti, R. |
26 | 2016 | Effect of composition on the microporosity, microstructure, and macrostructure in the start-up direct-chill casting billet of Al-Cu alloys | ARPN Journal of Engineering and Applied Sciences | Suyitno |
27 | 2016 | Characterization of the porous structures of the green body and sintered biomedical titanium scaffolds with micro-computed tomography | Materials Characterization | Arifvianto, B., Leeflang, M.A., Zhou, J. |
28 | 2015 | The compression behaviors of titanium/carbamide powder mixtures in the preparation of biomedical titanium scaffolds with the space holder method | Powder Technology | Arifvianto, B., Leeflang, M.A., Zhou, J. |
29 | 2015 | Three dimensional morphometry of distal femur to design knee prosthesis for indonesian population [Morfometría tridimensional del fémur distal para diseñar prótesis de rodilla para la población Indonesia] | International Journal of Morphology | Magetsari, R., Suyitno, Dharmastiti, R., Salim, U.A., Hidayat, L., Yudiman, T., Lanodiyu, Z.A., Dewo, P. |
30 | 2015 | Optimization of stir casting process parameters to minimize the specific wear of AL-SiC composites by Taguchi method | International Journal of Engineering and Technology | Sadi, Malau, V., Waziz Wildan, M., Suyitno |
31 | 2014 | A new technique for the characterization of the water leaching behavior of space holding particles in the preparation of biomedical titanium scaffolds | Materials Letters | Arifvianto, B., Leeflang, M.A., Zhou, J. |
32 | 2014 | Fabrication of metallic biomedical scaffolds with the space holder method: A review | Materials | Arifvianto, B., Zhou, J. |
33 | 2014 | Characterisation of space holder removal through water leaching for preparation of biomedical titanium scaffolds | Powder Metallurgy | Arifvianto, B., Leeflang, M.A., Duszczyk, J., Zhou, J. |
34 | 2014 | Optimization of process parameters of stir casting to maximize the hardness of Al-Sic composites by Taguchi method | International Journal of Applied Engineering Research | Malau, V., Wildan, M.W., Suyitno, Sadi |
35 | 2013 | Effect of temperature and displacement rate on behaviour of as-cast AA5182 and Al-3.3%Cu alloys under tensile loading near solidus temperature | Bulletin of Materials Science | Suyitno |
36 | 2013 | Surface modification of titanium using steel slag ball and shot blasting treatment for biomedical implant applications | International Journal of Minerals, Metallurgy and Materials | Arifvianto, B., Suyitno, Mahardika, M. |
37 | 2013 | Electropolishing of microchannels and its application to dialysis system | Procedia CIRP | Prihandana, G.S., Mahardika, M., Nishinaka, Y., Ito, H., Kanno, Y., Miki, N. |
38 | 2012 | Improvement of machining time in micro-EDM with workpiece vibration and graphite powder mixed in dielectric fluid | Indian Journal of Engineering and Materials Sciences | Prihandana, G.S., Sriani, T., Mahardika, M. |
39 | 2012 | Precision machining by discharge pulse counting methods in micro EDM processes | Journal of Mechanical Science and Technology | Mahardika, M., Prihandana, G.S., Mitsui, K. |
40 | 2012 | Influence of grit blasting treatment using steel slag balls on the subsurface microhardness, surface characteristics and chemical composition of medical grade 316L stainless steel | Surface and Coatings Technology | Arifvianto, B., Wibisono, S.K.A., Mahardika, M. |
41 | 2012 | The parameters evaluation and optimization of polycrystalline diamond micro-electrodischarge machining assisted by electrode tool vibration | International Journal of Advanced Manufacturing Technology | Mahardika, M., Prihandana, G.S., Endo, T., Tsujimoto, T., Matsumoto, N., Arifvianto, B., Mitsui, K. |
42 | 2012 | Effect of cold working and sandblasting on the microhardness, tensile strength and corrosion resistance of AISI 316L stainless steel | International Journal of Minerals, Metallurgy and Materials | Suyitno, Arifvianto, B., Widodo, T.D., Mahardika, M., Dewo, P., Salim, U.A. |
43 | 2012 | Effects of surface mechanical attrition treatment (SMAT) on a rough surface of AISI 316L stainless steel | Applied Surface Science | Arifvianto, B., Suyitno, Mahardika, M. |
44 | 2012 | Influence of grit blasting treatment using steel slag balls on the subsurface microhardness, surface characteristics and chemical composition of medical grade 316L stainless steel | Surface and Coatings Technology | Arifvianto, B., Wibisono, S.K.A., Mahardika, M. |
45 | 2012 | The parameters evaluation and optimization of polycrystalline diamond micro-electrodischarge machining assisted by electrode tool vibration | International Journal of Advanced Manufacturing Technology | Mahardika, M., Prihandana, G.S., Endo, T., Tsujimoto, T., Matsumoto, N., Arifvianto, B., Mitsui, K. |
46 | 2011 | Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes | International Journal of Advanced Manufacturing Technology | Prihandana, G.S., Mahardika, M., Hamdi, M., Wong, Y.S., Mitsui, K. |
47 | 2011 | Effect of low-frequency vibration on workpiece in EDM processes | Journal of Mechanical Science and Technology | Prihandana, G.S., Mahardika, M., Hamdi, M., Mitsui, K. |
48 | 2011 | The effect of annealing temperature on damping capacity of the bronze 20%Sn alloy | International Journal of Mechanical and Mechanics Engineering | Sugita, I.K.G., Soekrisno, R., Miasa, I.M., Suyitno |
49 | 2011 | Effect of surface mechanical attrition treatment (SMAT) on microhardness, surface roughness and wettability of AISI 316L | Materials Chemistry and Physics | Arifvianto, B., Suyitno, Mahardika, M., Dewo, P., Iswanto, P.T., Salim, U.A. |
50 | 2011 | Development and characterization of bovine hydroxyapatite porous bone graft for biomedical applications | Advanced Materials Research | Herliansyah, M.K., Suyitno, Dewo, P., Abdul Shukor, M.H.B., Ide-Ektessabi, A. |
51 | 2011 | Material removal and fracture detection in micro-EDM processes | Key Engineering Materials | Mahardika, M., Prihandana, G.S., Endo, T., Suyitno, Arifvianto, B., Sudiarso, A., Mitsui, K. |
52 | 2011 | Effect of sandblasting and surface mechanical attrition treatment on surface roughness, wettability, and microhardness distribution of AISI 316L | Key Engineering Materials | Arifvianto, B., Suyitno, Mahardika, M. |
53 | 2009 | Integrated approach for prediction of hot tearing | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | Suyitno, W.H., Kool, W.H., Katgerman, L. |
54 | 2009 | Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes-Taguchi approach | International Journal of Machine Tools and Manufacture | Prihandana, G.S., Mahardika, M., Hamdi, M., Wong, Y.S., Mitsui, K. |
55 | 2009 | The current methods for improving electrical discharge machining processes | Recent Patents on Mechanical Engineering | Prihandana, G.S., Mahardika, M., Hamdi, M., Mitsui, K. |
56 | 2008 | A new approach on the determination of ease of machining by EDM processes | International Journal of Machine Tools and Manufacture | Mahardika, M., Tsujimoto, T., Mitsui, K. |
57 | 2008 | A new method for monitoring micro-electric discharge machining processes | International Journal of Machine Tools and Manufacture | Mahardika, M., Mitsui, K. |
58 | 2006 | Sensor fusion strategy in the monitoring of cutting tool wear | Key Engineering Materials | Mahardika, M., Taha, Z., Suharto, D., Mitsui, K., Aoyama, H. |
59 | 2006 | Structure observations related to hot tearing of Al-Cu billets produced by direct-chill casting | Materials Science and Engineering A | Suyitno, Eskin, D.G., Katgerman, L. |
60 | 2006 | Hermal contraction of AA5182 for prediction of ingot distortions | Key Engineering Materials | Suyitno, Eskin, D.G., Katgerman, L. |
61 | 2005 | Hot tearing criteria evaluation for direct-chill casting of an Al-4.5 pct Cu alloy | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | Suyitno, Kool, W.H., Katgerman, L. |
62 | 2004 | Mechanical properties in the semi-solid state and hot tearing of aluminium alloys | Progress in Materials Science | Eskin, D.G., Suyitno, Katgerman, L. |
63 | 2004 | Finite element method simulation of mushy zone behavior during direct-chill casting of an Al-4.5 pct Cu alloy | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | Suyitno, Kool, W.H., Katgerman, L. |
64 | 2004 | Contraction of aluminum alloys during and after solidification | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | Eskin, D.G., Suyitno, Mooney, J.F., Katgerman, L. |
65 | 2004 | Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | Suyitno, A., Eskin, D.G., Savran, V.I., Katgerman, L. |
National Journal
International Proceedings
No | Year | Title | Source | Author |
1 | 2020 | Effects of water to solid ratio on thermal conductivity of fly ash-based geopolymer paste | IOP Conference Series: Earth and Environmental Science | Agustini, N.K.A., Triwiyono, A., Sulistyo, D., Suyitno |
2 | 2020 | Effect of punch velocity on punch force and burnish height of punched holes in punching procces of pure titanium sheet | Journal of Physics: Conference Series | Kurniawan, Y., Mahardika, M., Suyitno |
3 | 2020 | Comparative study of bonang gamelan musical instrument between hot forging and Post Cast Heat Treatment/PCHT on microstructure and mechanical properties | Journal of Physics: Conference Series | Slamet, S., Kusumaningtyas, I., Suyitno |
4 | 2020 | The effect of edm process on the microstructure of cp-titanium grade 2 and aisi 316 l in cardiovascular stent manufacturing | Key Engineering Materials | Pujiyulianto, E., Amalia, Y., Wahyuningsih, T., Field, F.Y.P.G., Mirahati, R.Z., Suyitno |
5 | 2020 | Numerical convergence in wear volume prediction of uhmwpe acetabular cup paired with cp ti femoral head hip implants | Key Engineering Materials | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
6 | 2020 | The influence of SMAT and polishing on the degradation of AZ31B magnesium alloy in 3.5 wt.% NaCl solution | Key Engineering Materials | Arifvianto, B., Mahardika, M., Salim, U.A., Suyitno, S. |
7 | 2020 | Hydroxyapatite (HA) for wastewater treatment | AIP Conference Proceedings | Hariyanto, S.D., Sriani, T., Mahardika, M., Prihandana, G.S. |
8 | 2020 | Effect of non-solvent concentration in the coagulation bath on water permeability of PES membrane | AIP Conference Proceedings | Yonita, S., Sriani, T., Mahardika, M., Prihandana, G.S. |
9 | 2020 | A study analysis of micro-hydro powerplant (MHPP) Potential from cooling of steam turbine | Proceeding – 2nd International Conference on Technology and Policy in Electric Power and Energy, ICT-PEP 2020 | Triasdian, Y., Pamingotan, H., Triatmodjo, B., Sriwijaya, R., Mahardika, M., Muflikhun, M.A. |
10 | 2020 | Design of PLC-based Control System for 18650 Lithium-ion Battery Dismantling Machine | IOP Conference Series: Materials Science and Engineering | Hadiwibowo, S., Wisambodhi, S.M., Mahardika, M., Perdana, I. |
11 | 2019 | Design and Simulation of Auto-Shifting System in Manual Transmission Gearbox for Electric Race Car with Fuzzy Logic Controller on Matlab-Simulink | Journal of Physics: Conference Series | Ramadhan, R.M., Sudiarso, A., Mahardika, M. |
12 | 2019 | Forging process on gamelan bar tin bronze Cu-25wt.%Sn post casting deformation to changes in microstructure, density, hardness, and acoustic properties | IOP Conference Series: Materials Science and Engineering | Slamet, S., Kusumaningtyas, I., Suyitno |
13 | 2019 | Wear Prediction of UHMWPE Cup Against Commercially Pure Titanium Hip Implant with the Nonlinear Load and Contact Area Wear Equation | IOP Conference Series: Materials Science and Engineering | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
14 | 2019 | The Influence of Mold Material on Cooling Curve, Solidification Parameters, and Micro-hardness of Al-6wt.%Si in Unidirectional Solidification | IOP Conference Series: Materials Science and Engineering | Masnur, D., Suyitno, Malau, V. |
15 | 2019 | Characterization of the Wear Resistance of 3D Printed Polylactic-Acid (PLA) in Water and Bovine Serum | IOP Conference Series: Materials Science and Engineering | Arifvianto, B., Putra, A.T., Prayoga, B.T., Mahardika, M., Suyitno |
16 | 2019 | Effect of Composition and Pouring Temperature of Cu-Sn Alloys on the Fluidity and Microstructure by Investment Casting | IOP Conference Series: Materials Science and Engineering | Slamet, S., Suyitno, Kusumaningtyas, I. |
17 | 2019 | Characteristics of stainless steel 316L artificial lumbar disk model made by investment casting | Proceedings – 2019 5th International Conference on Science and Technology, ICST 2019 | Setyana, L.D., Mahardika, M., Suyitno |
18 | 2019 | Effects of femoral head diameter on the predicted acetabular cup wear volume of CP-Ti and UHMWPE hip implants | Journal of Physics: Conference Series | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
19 | 2019 | Degradation of mechanically surface treated az31b magnesium alloy in 3.5 wt.% nacl solution | Materials Science Forum | Budi, A., Suyitno, Muslim, M. |
20 | 2018 | Experiment and FEM simulation of static test of knee joint prostheses | AIP Conference Proceedings | Suyitno, Purba, E., Pudjilaksono, L. |
21 | 2018 | Vibration of an I-beam bicycle frame made by aluminum casting | AIP Conference Proceedings | Kusumaningtyas, I., Agandhi, R.H., Isnawan, A.A., Suyitno |
22 | 2018 | Bifurcation stenting design and analysis using finite element method | AIP Conference Proceedings | Suyitno, Pratama, H.I., Pudjilaksono, L. |
23 | 2018 | Wear Prediction of UHMWPE Acetabular Cup against CP Titanium Femoral Head in a Hip Joint Simulator | IOP Conference Series: Materials Science and Engineering | Handoko, H., Suyitno, S., Dharmastiti, R., Magetsari, R. |
24 | 2018 | Pin on flat wear volume prediction of UHMWPE against cp Ti for orthopedic applications | AIP Conference Proceedings | Handoko, Suyitno, Dharmastiti, R., Magetsari, R. |
25 | 2018 | Design and finite element analysis of micro punch CNC machine modeling for medical devices | AIP Conference Proceedings | Pranoto, S.H., Mahardika, M. |
26 | 2018 | Finite element analysis to determine the stress distribution, displacement and safety factor on a microplate for the fractured jaw case | AIP Conference Proceedings | Pratama, J., Mahardika, M. |
27 | 2017 | Effect of clearance and punch speed on the cutting surface quality results of a brass blanking on the micropunch CNC machine | AIP Conference Proceedings | Ristiawan, I., Mahardika, M. |
28 | 2017 | Simulation and experiment based optimization of calligraphy manufacturing using a 5-axis CNC Milling Machine | Proceedings – 2016 2nd International Conference on Science and Technology-Computer, ICST 2016 | Muflikhun, M.A., Mahardika, M., Subarmono, Rochardjo, H.S.B. |
29 | 2017 | UAV long range surveillance system based on BiQuad antenna for the Ground Control Station | Proceedings – 14th IEEE Student Conference on Research and Development: Advancing Technology for Humanity, SCOReD 2016 | Mahardika, M., Nugroho, G., Prasetyo, E.Y. |
30 | 2017 | Fatigue crack propagation of ultra-high molecular weight polyethylene | Proceedings – 2017 7th International Annual Engineering Seminar, InAES 2017 | Suyitno, Pujilaksono, L. |
31 | 2017 | Static test and simulation of hip joint prosthesis | Proceedings – 2017 7th International Annual Engineering Seminar, InAES 2017 | Suyitno, Sutomo, L. |
32 | 2017 | Design and modeling balloon-expandable coronary stent for manufacturability | IOP Conference Series: Materials Science and Engineering | Suryawan, D., Suyitno |
33 | 2017 | Development of the Gliding Hole of the Dynamics Compression Plate | IOP Conference Series: Materials Science and Engineering | Salim, U.A., Suyitno, Magetsari, R., Mahardika, M. |
34 | 2017 | Neutron radiography and tomography investigations on the porosity of the as-cast titanium femoral stem | IOP Conference Series: Materials Science and Engineering | Sutiyoko, Suyitno, Mahardika, M., Akbar, F., Juliani, Setiawan, Baroto |
35 | 2017 | Neutron computed tomography investigation of the porosity on the titanium femoral knee investment casting | IOP Conference Series: Materials Science and Engineering | Prayoga, B.T., Suyitno, Dharmastiti, R., Akbar, F., Juliani |
36 | 2017 | Effect of T6 heat treatment and artificial aging on mechanics and fatigue properties of A356.0 aluminum alloy produced by 350 rpm centrifugal casting | Proceedings – 2016 6th International Annual Engineering Seminar, InAES 2016 | Iswanto, P.T., Akhyar, H., Malau, V., Suyitno, Wirawan, R. |
37 | 2017 | Increasing yield strength of AISI 316L plastically deformed by expanded hole techniques | Materials Science Forum | Salim, U.A., Suyitno, Magetsari, R., Mahardika, M. |
38 | 2017 | Design of mini interchanged rolling mill | Proceedings – 2017 7th International Annual Engineering Seminar, InAES 2017 | Salim, U.A., Purwanto, C. |
39 | 2016 | Effect of gating system on porosity and surface roughness of femoral stem in centrifugal casting | AIP Conference Proceedings | Sutiyoko, Suyitno, Mahardika, M. |
40 | 2016 | Influence of Clearance and Punch Velocity on the Quality of Pure Thin Copper Sheets Blanked Parts | IOP Conference Series: Materials Science and Engineering | Zakariya Lubis, D., Mahardika, M. |
41 | 2016 | Study on characteristics of electrochemical machining in producing multilayered microfilters | AIP Conference Proceedings | Sudiarso, A., Aladiat, A.A., Mahardika, M. |
42 | 2015 | Review of surface modification of nanoporous polyethersulfone membrane as a dialysis membrane | International Journal of Technology | Prihandana, G.S., Sriani, T., Mahardika, M. |
43 | 2014 | Surface characteristics of indonesian cortical bone screw | Advanced Materials Research | Laksono, P.W., Mahardika, M., Suyitno, Dewo, P. |
44 | 2014 | The influence of sandblasting and electropolishing on the surface hardness of AISI 316L stainless steel | Advanced Materials Research | Suyitno, Ishak |
45 | 2014 | Application of powder suspended in dielectric fluid for fine finish micro-EDM of Inconel 718 | International Journal of Advanced Manufacturing Technology | Prihandana, G.S., Sriani, T., Mahardika, M., Hamdi, M., Miki, N., Wong, Y.S., Mitsui, K. |
46 | 2013 | Study of workpiece vibration in powder-suspended dielectric fluid in micro-EDM processes | International Journal of Precision Engineering and Manufacturing | Prihandana, G.S., Mahardika, M., Hamdi, M., Wong, Y.S., Miki, N., Mitsui, K. |
47 | 2013 | Characterization of space holder removal through water leaching for the preparation of biomedical titanium scaffolds | International Powder Metallurgy Congress and Exhibition, Euro PM 2013 | Arifvianto, B., Leeflang, M.A., Duszczyk, J., Zhou, J. |
48 | 2012 | Design and analysis of dynamics compression plate by finite element analysis | Procedia Engineering | Mahardika, M., Arifvianto, B., Suyitno, Wibowo, A., Prihandana, G.S. |
49 | 2012 | Effect of slag ball blasting treatment on surface structure,roughness and wettability of 316LVM stainless steel | Procedia Engineering | Arifvianto, B., Pohan, G.A., Suyitno, Mahardika, M. |
50 | 2012 | Fluidity dan roughness during lost-foam casting of AA356.1 | Procedia Engineering | Suyitno, Karim, I.J.A. |
51 | 2012 | Effect of pouring temperature and casting thickness on fluidity, porosity and surface roughness in lost foam casting of gray cast iron | Procedia Engineering | Suyitno, Sutiyoko |
52 | 2011 | Roughness reduction in AISI 316L stainless steel after surface mechanical attrition treatment (SMAT) | AIP Conference Proceedings | Arifvianto, B., Suyitno, Mahardika, M. |
53 | 2011 | Contouring posterior and lateral tibia of Javanese people based on X-Rays images | Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011, ICICI-BME 2011 | Suyitno, Arifvianto, B., Sriwijaya, R.R.A., Nugroho, Y.H., Mahardika, M., Dewo, P. |
54 | 2011 | Hybrid surface treatment for improving mechanical and surface properties of AISI 316L stainless steel | Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011, ICICI-BME 2011 | Arifvianto, B., Suyitno, Mahardika, M. |
55 | 2011 | Study on the effect of nano and micro MoS2 powder in micro-electrical discharge machining | Advanced Materials Research | Prihandana, G.S., Sriani, T., Prihandana, K., Prihandana, Y., Mahardika, M., Hamdi, M., Mitsui, K. |
56 | 2009 | Surface roughness and wettability of AISI 316L induced by surface mechanical attrition treatment with different milling ball diameter | International Conference on Instrumentation, Communication, Information Technology, and Biomedical Engineering 2009, ICICI-BME 2009 | Arifvianto, B., Suyitno |
57 | 2009 | Simple model of Micro-Electrical Discharge Machining | Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 | Sar, S., Prihandana, G.S., Mahardika, M., Hamdi, M., Mitsui, K. |
58 | 2009 | Workpiece vibration aided nano-graphite powder suspended dielectric fluid in micro-electrical discharge machining (μ-EDM) processes | Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009 | Prihandana, G.S., Mahardika, M., Sar, S., Hamdi, M., Wong, Y.S., Mitsui, K. |
59 | 2008 | Acoustic emission signals in the micro-EDM of PCD | Advanced Materials Research | Mahardika, M., Mitsui, K., Taha, Z. |
60 | 2005 | Structure features related to hot tearing during direct chill casting | Proceedings of the Australasian Conference and Exhibition – Aluminium Cast House Technology | Eskin, D., Suyitno, Katgerman, L. |
61 | 2004 | Effect of casting speed on structure formation and hot tearing during direct-chill casting of AL-CU alloys | Solidification Processes and Microstructures: A Symposium in Honor of Wilfried Kurz | Suyitno, Eskin, D., Katgerman, L. |
62 | 2004 | Modeling of single-roll strip casting of AL-1%MN alloy: Correlation of strip thickness, solidification zone length and puddle shape | Multiphase Phenomena and CFD Modeling and Simulationin Materials Processes | Suyitno, Straatsma, E.N., Katgerman, L. |
63 | 2003 | Evaluation of mechanical and non-mechanical hot tearing criteria for DC casting of an aluminum alloy | TMS Light Metals | Suyitno, Kool, W.H., Katgerman, L. |
64 | 2003 | Experimental description and process simulation of direct chill (DC) casting of aluminum alloys | Proceedings of the Australian Asian Pacific Conference on Aluminium Cast House Technology | Katgerman, L., Eskin, D.G., Venneker, B.C.H., Zuidema Jr., J., Suyitno |
65 | 2002 | Determination of boundary conditions during the start-up of DC casting | American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD | Suyitno, Katgerman, L., Burghardt, A. |
66 | 2002 | Determination of boundary conditions during the start-up of DC casting | ASME International Mechanical Engineering Congress and Exposition, Proceedings | Suyitno, Katgerman, L., Burghardt, A. |
67 | 2002 | Micro-mechanical model of hot tearing at triple junctions in DC casting | Materials Science Forum | Suyitno, Kool, W.H., Katgerman, L. |
68 | 2001 | On the plastic flow behaviour of aluminum alloys in the mushy zone | Advances in the Metallurgy of Aluminum Alloys | Zheng, M., Suyitno, Van Haaften, W.M., Katgerman, L. |
National Proceedings
Book
No. | Author | Title | Publisher | Year | ISSN/ISBN |
1 | Budi Arifvianto | Synthesis and evaluation of porous titanium scaffolds prepared by using the space holder method for bone tissue engineering | Doctoral Thesis at Delft University of Technology (TU Delft), The Netherlands | 2017 | ISBN 978-94-6186-851-0 |
2 | Muslim Mahardika | Perancangan dan Manufaktur Pompa Sentrifugal | UGM Press | 2016 | ISBN: 979-420-913-9 |
3 | Muslim Mahardika | Avanced Machining Processes – Non-Conventional Machining | UGM Press | 2015 | ISBN: 978-602-386-125-5 |
4 | Muslim Mahardika | Mekatronika | UGM Press | 2014 | ISBN: 979-420-913-9 |
5 | Suyitno | Hot tearing and deformation in direct-chill casting of aluminum alloys | University of Technology (TU Delft), The Netherlands | 2005 | ISBN 90-9019393-6 |